Connecting a Windows PC to a Wireless Network

Introduction The purpose of these instructions is to help you configure your Windows computer and wireless network card to connect to a wireless router (or wireless access point; from now on, the terms “router” and “access point” will be used interchangeably). These instructions assume that you have Internet access, such as any of Cruzio’s Broadband Services, or that you are at a location with access, such as an…

Is My Computer Wireless-Ready?

Introduction Mac OS X Windows Vista Windows XP Older Windows Operating Systems Introduction To connect to wireless networks, a computer must have a wireless adapter. Use the instructions below to find out if your computer has a wireless adapter. If your computer has a wireless adapter, you may follow the Windows instructions or Mac instructions to connect to a wireless network. » back to top Mac OS X In the Apple menu, choose System…

Connecting a Mac, iPhone, iPad, or iPod Touch to a Wireless Network

Introduction The purpose of these instructions is to help you configure your Apple computer or iOS device—your iPhone, iPad, or iPod Touch—to connect to a wireless router. These instructions assume that you have Internet access, such as any of Cruzio’s Broadband services; or that you are at a location with access, such as an Internet café; and that you will be connecting to a wireless router that has previously been installed and…

Changing the Wireless Password on a Netgear WGT624v3 Router

Connect a computer to the Netgear wireless router with an Ethernet/network cable. You can use any of the 4 ports grouped in the back. Make sure the Netgear is powered on. Open your Web browser. In the address bar, enter 192.168.1.1 and press the Enter or Return key. A window will appear asking for a login and password.The default login name is: admin The default password is : password Enter this info and click OK. Once logged in, click the…

Changing the Wireless Channel on a Netgear WGT624v3 Router

Connect a computer to the Netgear wireless router with an Ethernet/network cable. You can use any of the 4 ports grouped in the back. Make sure the Netgear is on. Open your Web browser. Enter 192.168.1.1 into the address bar and press the Enter or Return key. A window will appear asking for a login and password.The default login name is: admin The default password is: password Once logged in, click the Wireless Settings link on the left. You…

Netgear WGT624v3 Router Setup

» Introduction » Getting Started » General Security Measures » Wireless Security Measures » Default Settings These instructions are optional. Use these instructions only if you want or need to change configuration specific to your home setup. The following instructions guide you through some basic steps to set up and secure your network. While we hope this document is helpful, Cruzio does not officially provide support for wireless networks….

DSL/Velocity Troubleshooting

Can’t surf the Web with your DSL or Velocity? You’re in the right place. Follow these steps in order until you’re connected again. Check your modem’s sync light Start by finding out if your DSL or Velocity modem has sync, or a working connection, by reading its sync light. To find the sync light, find your modem in the list below. (If your modem is not listed below, refer to its manual.) Where to find your modem’s…

DSL/Velocity Help

For help with your Cruzio Velocity or DSL, start with the articles below, or search the Support section. If you need Cruzio to move your DSL to a new location, or change the speed, please contact Cruzio. Using and Troubleshooting Your DSL or Velocity DSL/Velocity Troubleshooting Network Speed Test Security Tips Using Your Fusion Phone Cruzio Velocity comes with Fusion Phone service. Fusion Phone Help Fusion Voicemail FAQ Fusion Phone Taxes and…

Your Cruzio Modem: SR360n DSL Gateway

This document provides information for the The SR360n DSL Gateway – the Cruzio modem used with Velocity Phone + Internet service. The SR360n DSL Gateway provides high performance and flexibility for broadband subscribers. It combines a full-rate ADSL modem with a wireless access point using the latest 802.11n WiFi technology. It can be used as an Ethernet or DSL gateway, and includes a router and a firewall. All modems purchased from…

DSL/Velocity Setup for Mac

Introduction Connecting the Equipment Testing the Connection Configuring your Mac to Use a Wired Connection Introduction If, after following the setup instructions, your modem does not sync up and it is after 8 pm on your due date, please contact Cruzio Tech Support. If there is a problem with the provisioning of your circuit, we need to work on it right away. We don’t want you to pay for service you’re not receiving. Connecting…